Ferrari Fault Codes

P0102 Mass Air Flow Circuit (HFM) Low Input (min)

1 Check the wiring

2Check Air mass flow between leftand right. Difference not more 5kg/h

3 In Idle between 18-25 Kg/h

 

P0103 Mass Air Flow Circuit (HFM)High Input (max)

1 Check the wiring

2Check Air mass flow between leftend right. Difference not more 5kg/h

3 In Idle between 18-25 Kgffi

 

P0112 Intake Air Temperature Circuit

Low Input (max)

Checkihe wiring Air flow meter 2 Ta* (30-60 °Q in hot condition

 

P0113 Intake Air Temperature Circuit High Input (min)

1 Check the wiring Air flow meter

 

P0115 Engine Coolant Temperature Circuit Malfunction (sig)

1 Check the wiring

2 Check CAN line

3 Check CAN line impedence-60 ohm

4 Check lemperaatue between left and right. Has to be the same.

 

P0116 Engine Coolant Temperature Circuit Range/Performance (plaus)

1 Check the wiring

2 Check CAN line

3 Check CAN line impedence-60 ohm

4 Check temperature between left snd right Has to be the same.

 

P0117 Engine Coolant Temperature CircuitLow Input (max)

1 Check the wiring

2 Check CAN line

3 Check CAN line impedence«60 ohm

4 Check temperature between left end right. Has to be the same

 

.P0I18 Engine Coolant Temperature CircuitHigh Input (min)

1 Check the wiring

2 Check CAN line

3 Check CAN line impedence-60 ohm

4Check temperature between left and right Has to be the same.

 

P0121 Throttle Position Sensor CircuitRange/Performance (ptaus)

1 Check the wiring

2 Check the value, hot condition -tow~U-2.8% ^Acc-pedaMW -high-99-102% *Acc4Mdal-100%

 

P0130 02 Sensor Circuit (Upstream Catalyst) (Bank t, Sensor 1)Malfunction (plaus)

1 Check the wiring

2Check the signal (0.97-1.03)

3Check injectors and wiring

4 Check ignition coil and wiring

5 Check engine CO HC emission base HC<250npraCO<l.I%

 

P0131 02 Sensor Circuit (Upstream Catalyst) (Bank 1. Sensor 1) Low Voltage (min)

1. Check the wiring

2.Chcck the signal (0.97-1.03)

3Check injectors and wiring

4 Chock ignition cofl and wiring

5 Check engine CO HC emission baaa HC<250ppn» CtXl.1V.

 

P0132 02 Sensor Circuit (Upstream Catalyst) (Bank 1, Sensor 1) High Voltage (max)

lCkeck the wiring

2Checkthe signal (0.97-1.03)

3CbKk injectors and wiring

4 Chock ignition coil and wiring

5 Check engine CO HC emission base HC<2S0DDWCO<1.1%

 

P0133 02 Senior Circuit (Upstream Catalyst) (Bank 1, Sensor 1) Slow Response (min/max)

1 Check the wiring 2Cht«k the signal (0.97-1.03) 3Check injectors 

P0134 02 Sensor Circuit (Upstream Catalyst) (Bank 1, Sensor 1) No Activity Detected (sig) ICheck the wiring

2Check the signal (0.97-1.03)

3Check injectors and wiring

4 Check ignition coil and wiring

5 Check engine CO HC emission base HC<lS0pwoCO<l.l%

 

P0136 02 Sensor Circuit (Downstream Ctulyst) (Bank I, Sensor 2) Malfunction (plaus)

1 Check the wiring

2 Check the signal (0.97-1.05)

3 check Injector and wiring

4 Check ignition coil and wiring

5 Check engine CO HC emission base HC<2S0pp»CO<l.l%

 

P0138 02 Sensor Circuit (Downstream Catalyst) (Bank 1, Sensor 2) High Voltage (max)

1 Check the wiring

2 Check the signal (0.97-1.05)

3 check injector and wiring

4 Check ignition coil and wiring

5 Check engine CO HC emission base HC<250ppm CO<U%

 

P0I39 02 Sensor Circuit (Downstream Catalyst) (Bank 1. Sensor 2)Slow Response (plaus/min/max)

ICheck the wiring

2 Check the signal (0.97-1.OS)

3 Check injector and wiring

4 Check ignition coil and wiring

5 Check engine CO HC emistien bate HC<2S0ppatCO<l.l%

 

P0140 02 Sensor Circuit (Downstream Catalyst) (Bank 1, Sensor 2) No Activity Delected (sig)

1 Check the wiring

2 Check the signal (0.97-1.05)

3 check injector and wiring

4 Check ignition coil and wiring

5 Check engine CO HC emission base HC<250ppm CO<l.l%

 

P0150 02 Sensor Circuit (Upstream Catalyst) (Bank 2, Sensor 1) Malfunction (plaus)

ICheck the wiring

2Check the signal (0.97-1.03)

3Check injectors sod wiring

4 Check ignition coil and wiring

5 Check engine CO HC emission base with no lambda integrator

 

PO15102 SaaarOrc«ii(Ups«itunCiMly5t) (Bank 2. Sensor 1) Low Voltage (min)

lCheck the wiring

2Check the signal (0.97-1.03)

3Check Injectors and wiring

4 Check ignition coil and wiring

5 Check cagtet CO HC amission base HC<250apa OX 1.1%

 

P0152 02 Sensor Circuit (Upstream Catalyst) (Bank 2, Sensor 1)High Voltage (max) t

1.Check Ike wiring

2.Check tn« signal (0.97-1X0)

3.Chetk injectors and wiring

4 Check ignition coll and wiring

5 Check engine CO HC emission bnsa HC<250ppmCO<l.l%

 

P0153 02 Senior Circuit (Upstream Catalyst) (Bank 2. Sensor 1) Slow Response (miti/max) lCheck the wiring

2Check signal (0.97-1.03)

3Check injectors and wiring4

Check njnMon eoil and wiring

5 Check engine CO HC emission base HOOSftppm CO<U%

 

P0154 02 Sansor Circuit (Upstream Catalyst) (Bank 2, Sensor 1)No Activity Detected (sig) lCheck wiring

2Check the signal (0.97-1.03)

3Check injectors and wiring

4 Check ignition coil and wiring5

Check engine CO HC emission bnse HC<250pnm CtXMV.

 

P0156 02 Sensor Circuit (Downstream Catalyst) (Bank 2, Sensor 2) Malfunction (plaus)

Check the wiring

P0158 02 Sensor Circuit (Downstream Catalyst) (Bank 2, Sensor 2) High Voltage (max) lCheck the wiring

2 Check the signal (0.97-1.05)

3 check injector and wiring

4 Check ignition coil and wiring

5 Check engine CO HC emission bate HC<250ppra CO<l.l*/«

 

P0159 02 Sensor Circuit (Downstream Catalyst) (Bank 2, Sensor 2) Slow Response (plaus/min/rnax)

lCheck the wiring

2 Check the signal (0.97-1 .OS)

3 check injector and wiring

4 Check ignition coil and wiring

5 Check engine CO HC emission base HC<250ptunCO<I.l%

 

P0160 02 Sensor Circuit (Downstre««n Catalyst) (Bank 2, Sensor 2) No Activity Detected (sig) lCheck the wiring  

2 Check the signal (0.97-1X5)

3 check Injector and wiring

4 Check ignition con* and wiring

5 Check engine CO HC emission base HC<2S0nwn C0<1.1%

 

P0221 Throttle Position Sensor Circuit (Bank 2) Range/Performance (plaus)

1 Check the wiring

2 Check the value: -k>w=I.!-ZSH ->pcdiMr% •high-99-I02%->pedat-100%

 

P0300 Random/Multiple Cylinder Misfire DetectedAbove Threshold (max)

1 Check the wiring

2 Check injector functionality in diagnosis mode

3check ignition coil connection

 

P0301 CyUndcr 1 - Misfire Detected Above Threshold (rax)

1 Check the wiring

2 chock fool tank level

3 check Aid pressure

4 check fuel pnsnp

5 Check injector functionality In diagnosis mode, switching off injection valve sad Checking HC emission base

 

PO302 Cylinder 2 -Misfire DetectedAbove Threshold (max)

1 Check the wiring

2 check fuel tank level

3 check fuel pressure

4 check fuel pump

5 Check injector functionality in diagnosis mode, switching off injection valve and checking HC enunionbase5 check ignition coll connection6checK spark plugs

 

P0303 Cylinder 3 - Misfire Detected Above Threshold (max)

1 Check the wiring

2 check fuel tank level

3 check fuel pressure

4 check fuel pump 

5Check injector functionality in diagnosis mode, switching off injection valve and checking HC emission bate3 check Ignition coil connection

6 check spark plugs

 

P0304Cylinder 4 • Misfire DetectedAbove Threshold (max)

1 Check the wiring

2 check fuel tank level

3 check fuel pressure

4 check fuel pump

5 Check injector functionality in diagnosis mode, switching off injection valve and checking HC emission base

P03O5 Cylinder 5 - Misfire Detected Above Threshold (max)

1 Check the wiring

2 check fuel tank level

3 check fuel pressure

4 check fuel pump

5 Check injector functionality in diagnosis mode, switching off Injection valve and checking HC emission base

6 check Ignition coll connection6check spark plots

 

P0306 Cylinder 6 - Misfire Detected•Above Threshold (max)

1 Check the wiring

2 check fuel tank level

3 check fuel pressure

4 check fuel pump

5 Check injector functionality In diagnosis mode, switching off injection valve and checking HC emission base5 check Ignition coil connection6chock spark plues

 

P0307 Cylinder 7 • Misfire Detected Above Threshold (max)

1 Check the wiring

2 check fuel tank hrvet

3 check fuel pressure

4 check Aid pump

5 Check Injector functionality la diagnosis mode, switching off injection valve and checking HC emission base

6 Check Ignition coil connection6 check spark pings

 

P03O8 Cylinder 8 - Misfire DetectedAbove Threshold (max)

1 Check the wiring

2 check feel tank hrvcl

3 check fuel press ore

4 chock fuel pump

5 Chock injector functionality in diagnosis mode, switching off injection valve and checking HC emission base5 chock, ignition coil connection6Checkspark pines

 

P0327 Knock Sensor 1 Circuit Low Input (rain)

1 Check the wiring

2Check sensor mounting

 

P0328 Knock Sensor 1 CircuitHigh Input (max)1 Check the wiring 2 Check sensor mounting

 

P0332 Knock Sensor 2 CircuitLow Input (min)1 Check the wiring 2 Check sensor mounting

 

P0333 Knock Sensor 2 CircuitHigh Input (max)1 Check the wiring 2 Check sensor mounting

 

P0335 Crankshaft Position Sensor CircuitMalfunction (sig)

1 Check the wiring, DC sensor

2 Check fly-wheel mounting 

3 check gap between sensor and flywheel

4 Check crankshaft signal and Camshaft signal with oscilloscope PG3- -. - -   DC Number of teeth has to be 60-2

 

P0336 Crankshaft Position Sensor CircuitRange/Performance (plaus)

1 Check the wiring, DG sensor

2 Check fly-wheel mounting 

3check gap between sensor and flywheel

4 Check crankshaft signal and Camshaft signal with oscilloscope

P034] Camshaft Position Sensor Circuit Range/Performance (plaus)

1 Check the wiring, PG3 senior

2 Check crankshaft signal and Camshaft signnl with osdlloscope PC

3 Number of teeth has to be 60-2

 

P0342 Cvmhaft Position Sensor CircuitLow Input (min)

1 Check the wiring, PG3 leaser

2 Check crankshaft signal and Camshaft signal with oscilloscope PC3 Number of teeth has to be (0-2

 

P0343 Camshaft Position Sensor Circuit High Input (max)

1 Chock the wiring, FG9 sensor

2 Check crankshaft signal and Camshaft signal with oadlleocopc- PG3- _ _ _ D GNumber of taeth has to be 60-2

 

P0383 Crankshaft Position Sensor Circuit (Bank 2) Malfunction (sig)

1 Check the wiring, DG sensor

2 Check fly-wheel mounting 

3 check gap between sensor and flywheel

4 Check crankshaft signal and Camshaft signal with oscilloscope

PG3DGNumber of teeth hat to be 60-2

 

P0386 Crankshaft Position Sensor Circuit (Bank 2) Rangctf erfbrmancc (plaus)

1 Check the wiring, DG sensor

2 Check flywheel mounting

3 Check gap between sensor and flywheel

4 Check crankshaft signal and Camshaft signal with oscilloscope PG3- - DC Number ortecth has to be 60-2

 

P0422 Main Catalyst Efficiency Below Threshold (max)

1 check the exaust emission

2 check if (here art lekeage in the exaust system

3 check injector functionality

4 check ignition coil connection

5 check HC CO emission basa engine HC<250ppmCO<l.l%

 

P0432 Main Catalyst Efficiency (Bank 2) Below Threshold (max)

1 check the esanst emission

2 check if there are lekeage In the exaust system

3 check injector functionality

4 chock ignition coil connection

5 Check HC CO emission base engine HC<2S0ppm CXXl.1%

 

P0440 Evaporative Emission Control System Malfunction (max)

1 run test of EVAP systemmonitoring function

 

P0442 Evaporative Emission Control SystemLeak Detected (Small) (min) 1 run test of EVAP system monitoring function

 

P0446 Evaporative Emission Control System Vent Valve Malfunction (max)1check the wiring